• a qPCR amplification plot with no inhibition as the Spike control in water and in sample matrix shows the same Cq value and efficiency
  • The RT-reaction is inhibited but not the qPCR reaction, seen on the shifted Cq-value.

TATAA Universal RNA Spike II

1 2 3 4 5
(5/5) Based on 3 rating.
Reactions/SYBR or Probe:
699.00 EUR
699.00 EUR
655.00 EUR
205.00 EUR
205.00 EUR
195.00 EUR


TATAA universal RNA Spike is used to detect any inhibition of the cDNA synthesis/RT-PCR reaction.

TATAA Universal RNA Spike for quality Control

TATAA Universal RNA Spike II has an RNA sequence length of 2000 base pairs. The Spike II assay, which is used for detecting the Universal RNA Spike II template, is very robust and optimized for high sensitivity for inhibition. The assay amplifies a 286-base region towards the 3’-end of the synthetic template. The measured Cq-values and the shape of the amplification curves reflect the inhibition. The Cq-values of the Spike II assay also reflect losses during extraction, handling, transport, and storage of samples, including freeze-thaw events during RT-qPCR

The risk of compromised RT-qPCR results

Contaminants present in samples are known to inhibit enzymatic reactions and, in the context of a reverse-transcription quantitative Polymerase Chain Reaction (RT-qPCR) assay, are fully capable of distorting reported measurements.

Such enzymatic reactions are a necessary part of the sample-preparation prior to the qPCR, such as nuclease/proteinase treatment and subsequent reverse transcription of mRNA to cDNA. Inhibition of the RT-qPCR often causes erroneous biological readouts, even though the qPCR amplification curves can look perfectly normal. The reason is that these upstream reactions usually are exposed to a higher concentration of inhibitors than the PCR itself.
The measured Cq and the shape of the amplification curve reflect inhibition. If the Cq value is greater in an experimental sample than in the control then the analytical process of that experimental sample is inhibited (Figure 3-6). The magnitude of the difference between these Cq values reflects the degree of inhibition.

Test extraction yield

The TATAA Universal RNA spike may be added to any stabilised and homogenized sample prior to RNA purification to test for material loss during isolation, transportation and storage of samples, including freeze-thaw events during RT-qPCR.

Equal quantities of the RNA spike are added to each experimental sample and to a control sample. The control sample should be based on RNase free water or elution buffer of the same volume as used for elution/dissolving in RNA purification protocol. An equal Cq of the TATAA Universal RNA Spike in the experimental and control samples reflects 100% yield. If the Cq values differ, the yield of the extraction can be estimated.


Partno: RS10PFII
Partno: RS10PVII
Partno: RS10SII
Partno: RS25PFII
Partno: RS25PVII
Partno: RS25SII


Add review

Code from Captcha-image:

Rating (0)

You may also be interested in

  • TATAA Biocenter
    The TATAA Probe GrandMaster® Mix is a 2x concentrated ready to use fastmix wh...
    from 480.00 EUR
  • Biocision
    4L rectangular EVA-foam ice pan
    186.00 EUR
  • MultiD
    GenEx, the popular software for the processing and analysis of real-time qPCR...
    from 195.00 EUR
  • TATAA Biocenter
    Control for Inhibition - an easy to use and very effective tool for quality c...
    from 195.00 EUR
  • Other products of the same brand

  • TATAA Biocenter
    TATAA GrandPerformance SARS-CoV-2 Screening Kit TATAA GrandPerformance SARS-...
    926.00 EUR
  • TATAA Biocenter
    Background This kit is based on absolute quantification of your NGS librarie...
    Art. no. TA20-NGSQ
    479.00 EUR
  • TATAA Biocenter
    Alu elements are short stretches of about 300 bp that are unique to the human...
    95.00 EUR
  • TATAA Biocenter
    Robust and sensitive cDNA synthesis with user-defined RT priming
    from 149.00 EUR